9732 Hwy 180 West - Silver City, NM 88061 - (575) 535-2923
Hours: Monday-Friday 9 am - 5 pm (Mountain Time)
HOME
Other Products
About Us
Contact Us



Ruger Blackhawk Ejector Rod Housing. Replaces the Factory Aluminum Parts. Made from durable, machined steel that wears longer and functions smoother than the factory aluminum part. Increased weight helps cut down muzzle flip. High-lustre blue finish adds a trouch of class to your Ruglar Blackhawk revolver. SPECS: Steel, high-lustre blued. 4 inch (10 cm) long, 1/4 inch (6.3 mm) wide. Fits Blackhawk with 7 1/2 inch, 5 1/2 inch, and 4 5/8 inch barrels. Older guns, with silver brazed studs, use the 1/4 inch model. New guns use 200 inch model. $28.75. E/R Housing: 1/4 inch. E/R Housing: .200 inch.

Story Ruger Blackhawk Birdshead Ejector Rod Large, Round, Button is Easy to Hit. Dished button provides excellent finger purchase for fast, sure ejection. Patterned after the "Bullseye" style ejector used on original Colts. Fits all models of Blackhawk and Vaquero. SPECS: Steel, blue, polished finish. 4 inches (10.4 cm) long .48 inch (12 mm) dia. button. May require minor fitting. Birds Head Ejector: $28.75

Ruger 10/22 Barrel Band Strong Replacement Band for An Atrractive Look and Secure Fit. Rugged, machined steel bank replace factory alloy band and matches barrel finish. Machined to original dimensions, band is blued to either a gloss or matte finish to dress up and customize your rifle. Due to variations in manufacture of original firearm, some minor gunsmith fitting may be require to acieve proper fit. SPECS: Machined steel, matte or gloss blued finish. Fits Ruger 10/22 only. $28.75. Ruger 10/22 Barrel Band, Gloss Blue. Ruger 10/22 Barrel Band, Matte Blue.

Story Ruger Cylinders for Super Blackhawk available with removable bushing Ready to Fit and Chamber for Popular Cowboy Action and Hunting Cartridges. High quality, six-shot, cycliner makes it easy and economincal to building in a custom, large frame Ruger single action revolver for cowboy shooting or big game hunting. Outside diameter, as well as the timing ratchets and locking notches are pre-cut to save time and effort. Bored undersize to .304 inches, ready for you to ream the final chamber. Oversize length allows precise fitting to the factory frame for soild lockup and superior accuracy. Cylinders are available standard or with a seperate, pre-fit base pin bushing similar to 1st/2nd generation Colts. Bushing is .020 inches oversize in length to allow correct fitting of cylinder-to-frame by the gunsmith. Unfluted (UF) for maximum strength. SPECS: 4140 chrome moly steel, in the white. Six chambers borded to .304 inches (7.7 mm). I.D. for large frame, old and new style Ruger SA revolvers. Requires gunsmith fitting. .304 inch standard 5H119x95: $165.00. Base Pine Bushing only: $40. Dealer pricing.








Designed by Dave Johnson / dave@swnm.net / revised 11:36 AM 4/21/2015